Annex Engineering - Sherpa Mini
Overview
This extruder is not compatible with Breakneck
BOM
- 2x M3 Heatsets
- 3x M3 Square Nuts
- 2x M3x12 BHCS
- 1x M3x30 BHCS
Assembly
Heatsets
Square Nuts
Insert the square nuts into the slots on each side, use force while being careful not to break your print. You may use a soldering iron, in the same fashion you would a heatset, just go slow and be careful.
Securing to the block
Once you've measured, cut, and inserted your microbowden to fit the sherpa AND your hotend, you may secure the extruder to the block.
