Hotends
General BOM
Each hotend mount requires the following
- 1x 2510 Axial Fan
- 4x M2.5x16 SHCS
You will find the individual requirements of each hotend on their respective page.
Assembly
Most hotends are assembled the same, with the only variations typically being the length of the screw securing the hotend to the mount. You may find links to individual assembly instructions below, or use the video for generic assembly.
Video Guide
Hotend Specific Guides
Chube - Waterheater
VZ - Goliath
Phaetus - Dragon UHF/HF/SF
VolcoMosq / NF Crazy / Mosquito
Phaetus - Rapido